Yellow and exposed carbon fibre is a combination that never fails on a BMW G82 M4. This M4 Coupe came to our workshop in Woerden for a full M Performance-inspired carbon aero kit from PSR Parts, with a set of DCE Parts S58 downpipes and a lower stance to match.
The aero package starts at the front with the PSR Parts carbon fibre performance front splitter. It follows the lines of the G82 bumper, extends the lower edge forward and makes the front end look lower and more planted. Along the sides, PSR Parts MP style side skirts in dry pre-preg carbon continue that line between the wheels, and at the rear the dry pre-preg carbon rear bumper corners, or winglets, add the MP OEM style finish around the diffuser. Together they form a complete G82 M4 carbon kit with the look of the original M Performance parts.
Dry pre-preg carbon is the reason the side skirts and rear corners look and fit so well. The carbon sheets are pre-impregnated with resin and cured under pressure and heat, which gives a lighter, stronger part with a deep, even weave and a high quality clear coat. All three aero parts are designed for the G80 M3 and G82 M4 and follow the lines of the factory bumper and sills.
Underneath, DCE Parts S58 catless downpipes replace the factory downpipes, catalysts and, on European cars, particulate filters. Removing that restriction lets the twin turbos spool faster and gives the S58 sharper throttle response, with a much louder and rawer exhaust note, especially on cold starts and at full throttle. Catless downpipes require a suitable tune and are intended for track and off-road use, so always check the rules in your country. For owners who want a road-friendlier option, the same DCE downpipe is also available in catlook and high flow cat versions.
To complete the look, AC Schnitzer lowering springs bring the M4 closer to the ground. The smaller wheel gap makes the carbon aero sit visually lower and gives the coupe a planted, aggressive stance that ties the whole build together.
Looking for a G82 M4 MP style carbon front splitter, side skirts or rear corners, or an S58 downpipe for your M3 or M4? The PSR Parts carbon aero and DCE Parts downpipes from this build are available at PSR Parts and can be installed in our workshop in Woerden.
Wird geladen
bmw-g82-m4-psr-mp-carbon-dce-s58-catless-downpipe
DCE Parts versendet aus den Niederlanden (EU). Für Bestellungen nach {land} berechnen wir 0% MwSt. Einfuhrzölle, lokale Steuern und Zollabfertigungsgebühren sind nicht enthalten. Sie werden bei Lieferung vom Versanddienst oder Zoll erhoben und sind von Ihnen zu tragen.
Einkaufswagen
Zwischensumme
Rabattcodes, Versandkosten und Steuern werden bei der Bezahlung berechnet.
